- Menu
-
Compressors
- Heat exchangers
-
Line components
- Fans
- Installation equipment
-
Control equipment for refrigeration
- Air conditioning
GR24-NH3-4000 Samon electronic gas leak detection 12-24V AC/DC
€713.00
Tax excluded
GR24-NH3-4000 Samon electronic gas leak detection 12-24V AC/DC
NH 3 (ammonia)
- Type: GR24-HFC-NH3-4000
- Detector specially intended for mounting on the pressure relief valve (1.5m cable)
- Power supply: 12-24V AC / DC
- Temperatures: -40 ° C to + 50 ° C
- Size H x W x D (mm ): 160x80x60
- Sensitivity ppm: 0-4000
- Alarm levels ppm factory setting: 150 - 500-3000
- IP class: 54
- Detectors intended for installation in engine rooms, cold stores or other areas where gas is used, treated or stored.
- The detectors can be used independently, connected to a monitoring unit or any other monitoring system that accepts potential-free contact.
- Splash protection
EXPERT ADVICE
Professionals in refrigeration technology
SINCE 1986
Since 1986 in refrigeration technology
FACTORY GUARANTEE
You have Always genuine manufacturer's warranty
CUSTOMER SERVICE
info@mfmref.com
Description
GR24-NH3-4000 Samon electronic gas leak detection 12-24V AC/DC
NH 3 (ammonia)
- 160 x 80 x 60 HxBXD
- - 40°C tot + 50°C
- Microprocessor controlled with status display by means of led's.
- Built-in service button for pause detection ring during maintenance work for up to 1 hour.
- Self test function to check the operation of all leds and detectors.
- Fail-safefunctie (error safety function). D.w.z. at power failure, cable break or faulty sensor, the detector automatically in alarm.
- The Basic setting of the detectors is to adapt to environmental conditions causing false alarms.
- With 3 relay outputs, switching capacity 230V/5A.
- The factory setting are on the most sensitive value set to 100-1000-2000 ppm. Possibly itself.
- Time delay between detection and alerting is adjustable.
- Selection manual or automatic reset possible.
- Life sensors ca. 5 years. (CO2 sensors approx. 10 years)
- Moisture content: 0 ... 95% Rh (non-condensing)
- Note: CO2 models are self calibrating. Advice is to HFC and NH3 models to calibrate with the yearly service tool DT 300 (N501-4275).
- At all detectors should be every year a simple self test function and sensor "0" setting
Attachments
Download
VDH ALFANET TEMPLOGGER NL
VDH ALFANET TEMPLOGGER NL
Download (1.6MB )SAMON CATALOGUE-15- ENG
SAMON CATALOGUE-15- ENG
Download (3.14MB )