XR60CX-5N0C1 Dixell microprocessor based controller 230V

Dixell XR60CX 5N0C1 microprocessor based controller 230V

Model XR60CX, format 32 x 74 mm, is microprocessor based controller, suitable for applications on 

medium or low temperature ventilated refrigerating units. It has three relay outputs to control 

compressor, fan, and defrost, which can be either electrical or reverse cycle (hot gas). It is also 

provided with three NTC or PTC probe inputs, the first one for temperature control, the second one, 

to be located onto the evaporator, to control the defrost termination temperature and to managed the 

fan, the third one, optional, to connect to the HOT KEY terminals to signal the condenser 

temperature alarm or to display a temperature. The digital input can operate as fourth temperature 

probe. 

The HOT KEY output allows to connect the unit, by means of the external module XJ485-CX, to a 

network line ModBUS-RTU compatible such as the dIXEL monitoring units of X-WEB family. It 

allows to program the controller by means the HOT KEY programming keyboard. 

The instrument is fully configurable through special parameters that can be easily programmed 

through the keyboard.

230V 50/60Hz

1 relay output 20A for compressor

1 relay output 8A for defrosting

1 relay output 5A for evaporator fans

1 programmable digital input (clean contact)

2 selectable NTC/PTC probes (not included)

frontal dimension 78x37 depth 60 mm

mounting hole 71x29 mm

serial output Hot Key/TTL

Made in Italy