XW260L-5N0C0 Dixell 230V 20A temperature controller

XW260L-5N0C0 Dixell 230V-20A wing basic Electronic temperature controller  

The Wing Basic series controllers are available in panel mounting “V and L format”, designed for the heating and refrigeration market.

The controllers can have up to 4 relays: 1st for compressor, 2nd for defrost, 3rd for fans and 4th for light.

Maximum 2 sensors, for ambient temperature and defrost termination.

All panel mounting controllers can be programmed by means of a HOT KEY.

The very simple use and general applicability of the regulator makes it a great alternative to electromechanical regulators and the LOW BUDGET sigment.

Housing: Self-extinguishing ABS

Mounting: Panel mounting 31x150mm “L-format”

Panel mounting 72x56mm “V-format”

Front density: IP65

Supply voltage: 230Vac, ± 10%, 50 / 60Hz

Power consumption: 5VA maximum

Sensors: Maximum 2NTCs or PTCs

Readout: Red LED, 14.2mm high

Data storage: EPROM memory

Ambient temperature: 0 - 60ºC (32 - 140ºF)

Humidity: 20 - 85% RH

Measurement and control range: NTC: -50 ° C - 110 ° C

PTC: -50 ° C - 150 ° C

Resolution: 0.1ºC or 1ºF

Accuracy: Better than 1% of full scale

Connection terminals: Rail terminals 2.5mm can be dismantled

Relay: Compressor relay 20A (8A) or 8A (3A)

Registration: MIN / MAX temperature registration on all devices

Hotkey connection: Standard

Serial output RS485: Not possible!