MC 785-DF VDH termostato 2-fase com a estrutura de controlo da ventoinha e ontdooiing-
  • MC 785-DF VDH termostato 2-fase com a estrutura de controlo da ventoinha e ontdooiing-

MC 785-DF VDH termostato 2-fase com a estrutura de controlo da ventoinha e ontdooiing-

€ 700,00

MC 785-DF VDH termostato 2-fase com a estrutura de controlo da ventoinha e ontdooiing

  • Tipo: MC 785DF 
  • Fonte de alimentação: 230V AC 
  • Temperaturas: -40 ° C a + 50 ° C 
  • Tamanho Grande x x alta Deep (mm): 213 x 180 x 80 
  • PT100 do sensor: exclusivo.
Quantidade

EXPERT ADVICE

Professionals in refrigeration technology

SINCE 1986

Since 1986 in refrigeration technology

CUSTOMER SERVICE

+31 413 266 426

FACTORY GUARANTEE

Always original manufacturer's warranty

Descrição

MC 785-DF VDH termostato 2-fase com a estrutura de controlo da ventoinha e ontdooiing

  • The MC 785T-DF is a thermostat with two control stages, a defrost processor and fan control.
  • The MC 785T-DF has a real time week clock. The clock can be used for real-time defrost and for automatical switching between day and night setpoint.
  • The internal battery ensures that the clock will continue during power failure.
  • The thermostat section can be programmed as cooling/heating or two stages of cooling or heating.
  • The defrost is stopped on temperature with a limit on time. The defrost is started on an interval time, but can also be started by hand.
  • The fan can be switched in automatic or continuous mode from the front.
  • To the MC 785T-DF two control sensors can be connected, which makes it possible to control on the average of two sensors.
  • Also two defrost sensors can be connected, where the defrost will first stop when both sensors reached the end-of-defrost temperature.
  • The measured temperature and status of the controller can be read-out directly from the front.
  • Operation and control has an easy and logic set-up.
  • The MC 785T-DF has a digital input for external alarm and an analogue 0/+10 Vdc output for e.g. a P(I) function.
  • The alarm relay switches if the measured temperature exceeds a preset alarm level.
  • The MC 785T-DF Alfanet has a network connection for read-out and data logging on the Alfanet PC software.
  • The standard MC 785T-DF does not have this connection.
  • The MC 785T-DF is available for wall or panel mounting.
  • The MC 785T-DF is supplied directly with 230Vac. Other supply voltages are possible on request.
Detalhes do produto
MFMREF157975140

Referências específicas