Samon GD230-HFC electronic gas leak detection 230 AC
  • Samon GD230-HFC electronic gas leak detection 230 AC
  • Samon GD230-HFC electronic gas leak detection 230 AC
  • Samon GD230-HFC electronic gas leak detection 230 AC

Samon GD230-HFC electronic gas leak detection 230 AC

€448.00
Tax excluded

GD230-HFC Samon electronic gas leak detection 230 AC

R404A , R507, R410A, R134a, R407C /A / F (Also suitable for R22)

  • Type: GD230-HFC ((Detector and sensor in one) 
  • Power supply: 230V AC 
  • Temperatures: -40 ° C to + 50 ° C 
  • Size H x W x D (mm): 160x80x60 
  • Sensitivity ppm: 0-4000 
  • Alarm levels ppm factory setting: 100 - 1000 - 2000 
  • IP class: 21
  • Detector and sensor in one
  • Detectors intended for installation in engine rooms, garages or other areas where gas is used, handled or stored.
  • The detectors can be used independently, connected to a monitoring unit or any other monitoring system that accepts potential-free contact.
Quantity

EXPERT ADVICE

Professionals in refrigeration technology

SINCE 1986

Since 1986 in refrigeration technology

FACTORY GUARANTEE

You have Always genuine manufacturer's warranty

CUSTOMER SERVICE

+31 413 266 426

info@mfmref.com

Description

Samon GD230-HFC electronic gas leak detection 230 AC   

R404A , R507, R410A, R134a, R407C /A / F (Also suitable for R22)

  • 160 x 130 x 60   HxBXD
  • - 40°C tot + 50°C
  •  Microprocessor controlled with status display by means of led's.
  •  Built-in service button for pause detection ring during maintenance work for up to 1 hour.
  •  Self test function to check the operation of all leds and detectors.
  •  Fail-safefunctie (error safety function). D.w.z. at power failure, cable break or faulty sensor, the detector automatically in alarm.
  •  The Basic setting of the detectors is to adapt to environmental conditions causing false alarms.
  •  With 3 relay outputs, switching capacity 230V/5A.
  •  The factory setting are on the most sensitive value set to 100-1000-2000 ppm. Possibly itself.
  •  Time delay between detection and alerting is adjustable.
  •  Selection manual or automatic reset possible.
  •  Life sensors ca. 5 years. (CO2 sensors approx. 10 years)
  •  Moisture content: 0 ... 95% Rh (non-condensing)
  •  Note: CO2 models are self calibrating. Advice is to HFC and NH3 models to calibrate with the yearly service tool DT 300 (N501-4275).
  •  At all detectors should be every year a simple self test function and sensor "0" setting
Product Details
MFMREF155014000

Specific References

Attachments

Download

SAMON CATALOGUE-15- ENG

SAMON CATALOGUE-15- ENG

Download (3.14MB )